PRICE
Project quote
Configuration, delivery schedule and investment figure are set by project scope. From your specification we prepare the supply plan from the manufacturer line and the integration scope.
Enterprise supply · specification support · integration engineering
Overview
The PLT1000 is a heavy-duty tracked chassis designed with watertight materials, structure and components for outdoor and wet ground. The 1100 × 800 × 460 mm body is stainless steel, weighs 170 kg and carries a 100 kg payload; interior space is 280 × 300 × 300 mm and chassis height 120 mm. Two 48 V DC motors deliver 82 Nm of rated torque; speed is 1.6 m/s, climbing 40 degrees (stairs included) and obstacle clearance 180 mm. Suspension is the Christie and Matilda four-wheel balanced version with six independent shock absorbers; the tracks are Kevlar-embedded rubber. Protection is IP66, optionally IP67. Motion control is exposed over CAN and secondary development is supported; the top platform is left free for sensing, industrial control, networking and camera equipment. It serves firefighting, EOD, patrol inspection, detection and wading projects. On the same page the manufacturer also lists the larger PKT1200 version.
An IP66 watertight structure
Materials, structure and components are chosen watertight; protection is IP66, optionally IP67. Rain, standing water and washdown areas do not stop the chassis.
Stainless steel, 180 mm obstacles
The stainless-steel body resists corrosion; it clears 180 mm obstacles, climbs 40 degree stairs and reaches 1.6 m/s.
The PKT1200 sibling
The same product page lists the PKT1200 at 1240 × 930 × 420 mm, 268 kg and 163 Nm; it is quoted for projects needing a larger interior.
PLT1000; Live Demonstration
Details & Performance Parameters.
Physical Architecture
Dynamic Performance
Energy & Protection
Watertight materials, structure and components; top platform free for payload
2 × 48 V DC motors, rated torque 82 Nm; CAN motion-control protocol; secondary development support
Hardware & Materials
Stainless-steel body; Kevlar-embedded rubber tracks; Christie and Matilda four-wheel balanced suspension, 6 independent shock absorbers
Bring Autonomous Power to the Field.
Start your PLT1000 project with our experts now.
Get a PLT1000 Quote
There is no single list price; the investment depends on configuration and use case. Fill in the form and we will return with a clear, tailored quote.
- Supply plan and delivery schedule from the manufacturer line
- Technical feasibility against your project requirements
- Integration scope and engineering support
- Specification and documentation support for corporate procurement
Prefer to talk now: 0850 532 6 777
About the Guoxing PLT1000
PLT1000 Frequently Asked Questions
The most commonly asked questions and answers about PLT1000.
The manufacturer gives a watertight structure and IP66 protection, with IP67 optional. It is designed for wet ground and shallow puddles; for missions requiring flotation the AT-2000 amphibious chassis is quoted.
The PLT1000 leaves its top platform free for payload: sensors, an industrial control unit, network equipment, a camera or a robot arm. Motion control is exposed over a CAN protocol and secondary development is supported; the integration diagram is shared at quotation.
The chassis is driven by remote control and motion commands over CAN; autonomy comes from the perception and navigation layer the integrator builds on top. Guoxing supplies only the motion platform.
Through enterprise supply and commissioning. For a quotation, send the payload weight, obstacle-clearance need and special requirements; the manufacturer configures the chassis to these values.
