PRICE
Project quote
Configuration, delivery schedule and investment figure are set by project scope. From your specification we prepare the supply plan from the manufacturer line and the integration scope.
Enterprise supply · specification support · integration engineering
Overview
The Safari 600T is the entry model of Guoxing's tracked chassis family, designed for high passability and cross-country capacity. The 1020 × 760 × 360 mm body weighs 100 kg and carries an 80 kg payload; interior space is 510 × 290 × 220 mm and chassis height 100 mm. Two 48 V brushless DC motors deliver 60 Nm of rated torque; speed runs from 0 to 1.4 m/s, climbing 40 degrees and obstacle clearance 170 mm. A carbon-steel body, Kevlar-embedded rubber tracks, Christie suspension and six independent shock absorbers handle heavy load and vibration. Protection is IP54, optionally IP67. Advanced operating modes are customised, motion control is exposed over CAN and secondary development is supported; the top platform is left free for sensing, industrial control, networking and camera equipment. It serves as the motion solution in firefighting, EOD, patrol inspection, detection and research projects.
Christie suspension with six absorbers
Three independent shock absorbers per side take terrain impact; the 80 kg payload rides rough ground without jolting. Camera and sensor feeds stay steady as a result.
40 degrees, 170 mm
It climbs 40 degrees, clears 170 mm obstacles and reaches 1.4 m/s; Kevlar-embedded rubber tracks resist slipping.
Open motion control over CAN
Motion control is exposed over CAN and secondary development is supported. The integrator builds its own perception and navigation layer on the top platform.
Safari 600T; Live Demonstration
Details & Performance Parameters.
Physical Architecture
Dynamic Performance
Energy & Protection
Top platform free for payload: sensing, industrial control, networking, camera; customisable operating modes
2 × 48 V brushless DC motors, rated torque 60 Nm; CAN motion-control protocol; secondary development support
Hardware & Materials
Carbon-steel body; Kevlar-embedded rubber tracks; Christie suspension, 6 independent shock absorbers
Bring Autonomous Power to the Field.
Start your Safari 600T project with our experts now.
Get a Safari 600T Quote
There is no single list price; the investment depends on configuration and use case. Fill in the form and we will return with a clear, tailored quote.
- Supply plan and delivery schedule from the manufacturer line
- Technical feasibility against your project requirements
- Integration scope and engineering support
- Specification and documentation support for corporate procurement
Prefer to talk now: 0850 532 6 777
About the Guoxing Safari 600T
Safari 600T Frequently Asked Questions
The most commonly asked questions and answers about Safari 600T.
The 600T Mini is narrower (1000 × 570 × 450 mm) but heavier (138 kg), carries 100 kg and delivers 90 Nm; its speed is 1.1 m/s, climbing 30 degrees and obstacle clearance 140 mm. The 600T is faster and climbs steeper, while the Mini is designed for narrow passages.
The Safari 600T leaves its top platform free for payload: sensors, an industrial control unit, network equipment, a camera or a robot arm. Motion control is exposed over a CAN protocol and secondary development is supported; the integration diagram is shared at quotation.
The chassis is driven by remote control and motion commands over CAN; autonomy comes from the perception and navigation layer the integrator builds on top. Guoxing supplies only the motion platform.
Through enterprise supply and commissioning. For a quotation, send the payload weight, obstacle-clearance need and special requirements; the manufacturer configures the chassis to these values.
