PRICE
Project quote
Configuration, delivery schedule and investment figure are set by project scope. From your specification we prepare the supply plan from the manufacturer line and the integration scope.
Enterprise supply · specification support · integration engineering
Overview
The Safari 880T is the Safari family member developed for high passability and cross-country capacity. The 1010 × 720 × 435 mm body is stainless steel, weighs 135 kg and carries a 120 kg rated load; the manufacturer gives the loading range as 100 to 260 kg. Interior space is 320 × 275 × 248 mm and chassis height 140 mm. Two 48 V brushless DC motors deliver 82 Nm of rated torque; speed runs from 0 to 1.6 m/s, climbing 40 degrees (stairs included) and obstacle clearance 200 mm. Suspension is the Christie and Matilda four-wheel balanced version with six independent shock absorbers; the tracks are Kevlar-embedded rubber. Protection is IP54, optionally IP67. Motion control is exposed over CAN and secondary development is supported; the top platform is left free for sensing, industrial control, networking and camera equipment.
A stainless-steel body
The body is stainless steel; in facilities with humidity, chemical vapour or washdown it outlasts carbon-steel chassis.
Matilda balanced suspension
Christie and Matilda four-wheel balanced suspension keeps track contact with the ground; 200 mm obstacles and 40 degree stairs are cleared on that balance.
Up to 260 kilograms
Rated load is 120 kg and the loading range 100 to 260 kg; projects mounting a heavy sensor mast or arm have headroom.
Safari 880T; Live Demonstration
Details & Performance Parameters.
Physical Architecture
Dynamic Performance
Energy & Protection
Top platform free for payload: sensing, industrial control, networking, camera; customisable operating modes
2 × 48 V brushless DC motors, rated torque 82 Nm; CAN motion-control protocol; secondary development support
Hardware & Materials
Stainless-steel body; Kevlar-embedded rubber tracks; Christie and Matilda four-wheel balanced suspension, 6 independent shock absorbers
Bring Autonomous Power to the Field.
Start your Safari 880T project with our experts now.
Get a Safari 880T Quote
There is no single list price; the investment depends on configuration and use case. Fill in the form and we will return with a clear, tailored quote.
- Supply plan and delivery schedule from the manufacturer line
- Technical feasibility against your project requirements
- Integration scope and engineering support
- Specification and documentation support for corporate procurement
Prefer to talk now: 0850 532 6 777
About the Guoxing Safari 880T
Safari 880T Frequently Asked Questions
The most commonly asked questions and answers about Safari 880T.
Key figures: 120 kg rated load and the summary box a 100 to 260 kg loading range. 120 kg should be the basis for continuous work; the 260 kg ceiling is for short missions with reduced climbing and speed, confirmed with the manufacturer at quotation.
The Safari 880T leaves its top platform free for payload: sensors, an industrial control unit, network equipment, a camera or a robot arm. Motion control is exposed over a CAN protocol and secondary development is supported; the integration diagram is shared at quotation.
The chassis is driven by remote control and motion commands over CAN; autonomy comes from the perception and navigation layer the integrator builds on top. Guoxing supplies only the motion platform.
Through enterprise supply and commissioning. For a quotation, send the payload weight, obstacle-clearance need and special requirements; the manufacturer configures the chassis to these values.
