PRICE
Project quote
Configuration, delivery schedule and investment figure are set by project scope. From your specification we prepare the supply plan from the manufacturer line and the integration scope.
Enterprise supply · specification support · integration engineering
Overview
The UWorld U1 Lite is the half-body version of the U1 series and carries the only genuine structural difference in the line: an upper body instead of a full one. We supply UWorld platforms to corporate projects in Turkey through enterprise supply, commissioning and technical integration. Configuration, delivery terms and investment are set by corporate quotation.
One important limit applies. The 183 cm and 168 cm heights and the 42 kg and 35.2 kg weights in the table belong to the full-body characters and do not apply to the half-body version.
The series-wide values are these: 24 active degrees of freedom across head and neck, five in the neck and 19 in the facial muscles. The face carries a 33-axis tendon network, and more than 30 natural micro-expressions with 90 percent emotional expression accuracy. Voice-to-lip latency is held under 20 milliseconds.
In the half-body version the robot consists entirely of the face and upper body, so appearance quality carries all the weight. The skin is modelled 1:1 from a real person so that pores, veins and texture stay visible, with eyelashes, eyes and hair texture worked separately.
In uses such as a reception desk, an exhibition stand or a fixed companion point in a room, the robot does not move anyway.
On privacy UWorld describes two layers: support for data deletion and user control in software, and compliance with international safety standards in hardware. It also publishes a separate privacy policy for ultra-biomimetic humanoid robots.
The Only Genuine Structural Difference in the Line
The U1 Pro and U1 Ultra are full bodies and the U1 Lite a half body. The absence of a lower body changes dimensions, weight and installation form, and it appears intended to sit on a table, counter or pedestal.
The Face and Makeup Layer
In the half-body version the robot consists entirely of the face and upper body, so appearance quality carries all the weight. It is star-level makeup and modelling-level bone structure, with the skin modelled 1:1 from a real person so that pores, veins and texture stay visible. Eyelashes, eyes and hair texture are stated to be worked separately.
Data Privacy and Security
On a companion robot with a camera, microphone and cloud connection, privacy is a technical heading. UWorld describes two layers: support for data deletion and user control on the software side, and compliance with international safety standards on the hardware side. It also publishes a separate privacy policy for ultra-biomimetic humanoid robots. If such a robot were deployed in Turkey, personal data legislation would need separate assessment.
Analysis of the Half-Body Version
What a Half Body Gains
Removing the lower body gains three things: cost, weight and ease of installation. In uses such as a reception desk, an exhibition stand or a fixed companion point in a room, a full body is not needed because the robot does not move anyway. In that sense the Lite may be the most coherent version in the line.
The U1 Lite Against the Full-Body Versions of the Line
| Feature | U1 Lite | U1 Pro | U1 Ultra |
|---|---|---|---|
| Body | Half | Full | Full |
| Height | - | 183 cm / 168 cm | 183 cm / 168 cm |
| Weight | - | 42 kg / 35.2 kg | 42 kg / 35.2 kg |
| Head and neck DoF | 24 | 24 | 24 |
| Facial tendon network | 33 axes | 33 axes | 33 axes |
| Compute | Up to 200 TOPS | Up to 200 TOPS | Up to 200 TOPS |
Engineering Assessment
The U1 Lite may be the most internally coherent version in the line. An organization planning to place the Lite on a counter or desk cannot draw a layout without requesting those from the manufacturer.
Details & Performance Parameters.
Physical Architecture
Dynamic Performance
Energy & Protection
Computing & Intelligence
arm64 with an NVIDIA Jetson Orin reaching up to 200 TOPS (series-wide)
A six-microphone array on top of the head, a mono speaker at the back of the head, two RGB cameras in the eyes and two chest sensors; Wi-Fi 6 and Bluetooth 5.0
Mechanical Components
24 active degrees of freedom across head and neck: five in the neck and 19 in the facial muscles.
An upper body that appears intended for desktop or fixed-pedestal use, though the manufacturer does not define the installation form
A dual-fulcrum, four-bar-linkage biomimetic cervical spine with 0.06 mm linear servo precision
Hardware & Materials
Silicone ultra-biomimetic skin modelled 1:1 from a real person
The New Intelligence of Operation.
Start your U1 Lite project with our experts now.
Get a U1 Lite Quote
There is no single list price; the investment depends on configuration and use case. Fill in the form and we will return with a clear, tailored quote.
- Supply plan and delivery schedule from the manufacturer line
- Technical feasibility against your project requirements
- Integration scope and engineering support
- Specification and documentation support for corporate procurement
Prefer to talk now: 0850 532 6 777
IN THE PRESS
U1 Lite Frequently Asked Questions
The most commonly asked questions and answers about U1 Lite.
The 183 cm and 168 cm heights and the 42 kg and 35.2 kg weights in the technical parameter table belong to the full-body characters (Nix and Una) and do not apply to the half-body version. If you plan to place the Lite on a desk or pedestal, dimensions, weight and mounting form should be requested from the manufacturer.
Nothing, according to the published data. There is no walking, payload or arm motion either. The robot is already a stationary interaction body.
We deliver UWorld hardware to corporate projects through enterprise supply, commissioning and engineering support. The manufacturer sells into the Chinese market; we handle import, correspondence and technical documentation, and investment is set by corporate quotation. With organizations evaluating a robot for a reception desk or an exhibition stand we can discuss the sourcing route per project.
