Genisom: quadrupeds in three load classes plus the NE 01 humanoid
Genisom splits its quadruped range into three load classes. The L1 family is the compact class at 15 kg: an 8 kg payload, IP54 protection, 3.7 m/s and 48 N·m of joint torque; the wheeled-legged L1-W rises to a 22 kg body and a 10 kg payload in the same family. The L2 family moves to IP66 and 95 N·m, gives a 20 km unloaded range and climbs 25 cm steps, and the L2-W Ultra carries surround-view sensing as standard. The M1 family closes the heavy class with IP67, 180 N·m, 6 m/s and a 30 kg payload. A fourth line is the NE 01 humanoid: 1328 mm tall, 37 kg, with 24 to 28 degrees of freedom by edition and seven per arm on the Ultra. The L1 Maker offers the same L1 body as an education kit built from its parts. The manufacturer also sells its P and W series joint modules as separate products. Robotlar.org supplies Genisom bodies to corporate projects in Turkey with enterprise supply, commissioning and engineering support.
Compact Industrial Quadruped Robot
The Genisom L1 is a compact industrial quadruped weighing 15 kg that carries 8 kg while walking (limit 10 kg) and reaches 3.7 m/s. Reinforcement-learned motion control keeps its balance on 16 cm steps and 30° grades (limit 40°); the IP54 body works from 0 to 40°C. Twelve 48 N·m joint modules need no calibration, and seven hardware interfaces plus an SDK are open to secondary development.
Compact Wheeled-Leg Robot
The Genisom L1-W is a 22 kg compact wheeled-leg robot that adds four hub motors to the L1 platform. On flat ground it rolls at 3.7 m/s (limit 5.5 m/s), clears 65 cm obstacles and 16 cm steps on its legs, and carries 10 kg while walking (limit 12 kg). Wheel drive runs at 55 dB, and the IP54 body with 9 km range covers indoor and outdoor sites.
Educational Assembly Quadruped Robot
The Genisom L1 Maker is the series-production L1 platform delivered in parts for education: students build the robot themselves from joint modules, body and electronic sub-assemblies, run the production calibration and take it apart again. The assembled robot matches the industrial L1 at 15 kg, 8 kg payload, 3.7 m/s and 16 cm steps.
Mid-Class Industrial Quadruped Robot
The Genisom L2 is a mid-class industrial quadruped whose 21 kg body carries 16 kg while walking and bears 150 kg static load standing; its payload-to-weight ratio exceeds 7:1. The 756 Wh battery runs 5.5 hours and 20 km unloaded, 3.5 hours and 12 km at full load. 95 N·m joints take 22 cm steps and 40° grades; the IP66 body works in rain, dust and mud from -20 to 55°C.
Mid-Class Wheeled-Leg Robot
The Genisom L2-W is a 27 kg mid-class wheeled-leg robot that adds wheels to the L2 body. It carries 16 kg walking, rolls at 3.7 m/s (limit 5 m/s) and takes 25 cm steps and 40° grades on its legs. The 756 Wh battery runs 5.5 hours and 20 km unloaded; the IP66 body works from -20 to 55°C.
Surround-View Wheeled-Leg Robot
The Genisom L2-W Ultra is an autonomously navigating wheeled-leg robot that adds two industrial 96-line LiDARs, a surround fisheye camera array, RTK and 5G to the L2-W body. The RoamerX system maps, positions to centimetre level and plans routes indoors, outdoors and across floors; the GLUE system fuses UWB and vision for following without blind spots. The 27 kg body carries 16 kg and works at IP66 from -20 to 55°C.
Heavy-Class Wheeled-Leg Robot
The Genisom M1 is a heavy-class wheeled-leg robot whose 41 kg body carries 30 kg continuously, reaches 6 m/s (limit 8 m/s) and is protected to IP67. 180 N·m joints clear 25 cm steps, 45° grades and 80 cm vertical obstacles; two hot-swappable 54 V 9.35 Ah batteries run 5 hours and 29 km unloaded. 3D LiDAR, a depth camera, RTK and a 100 TOPS processor are standard, autonomous navigation optional.
Extended-Perception Wheeled-Leg Robot
The Genisom M1 Pro is the M1 platform version that carries the mapping, positioning and navigation package as standard and adds an ultrasonic sensor, UWB and laser-vision following, voice dialogue plus recording and broadcast. The 41 kg body carries 30 kg, reaches 6 m/s and clears 25 cm steps and 45° grades with IP67 protection and 180 N·m joints; two hot-swappable batteries run 5 hours and 29 km unloaded.
High-Dynamic Humanoid Robot
The Genisom NE 01 is a high-dynamic humanoid robot 1328 mm tall, weighing about 37 kg, with 24 degrees of freedom. Each leg has 6 axes, each arm 5 and the waist 2; the joints deliver 120 N·m peak torque, the arm carries 2 kg and the robot reaches 2.5 m/s. The 540 Wh battery runs about 2 hours at 1 m/s; a 1080p stereo camera, microphone and speaker are standard. This entry version has no expansion processor or secondary development.
SDK-Enabled Humanoid Robot
The Genisom NE 01 Pro is the research version that adds a Jetson Orin Nano (67 TOPS) expansion processor and a secondary development SDK to the NE 01 body and raises joint torque to 180 N·m. 1328 mm tall, about 37 kg, 24 degrees of freedom (leg 6, arm 5, waist 2), 2 kg arm payload and 2.5 m/s; the 540 Wh battery runs about 2 hours at 1 m/s. A 1080p stereo camera, microphone and speaker are standard.
Seven-Axis-Arm Humanoid Robot
The Genisom NE 01 Ultra is the top version of the series: 28 degrees of freedom with 7 axes per arm, 3 kg arm payload, 180 N·m joint torque and a Jetson Orin NX expansion processor with 157 TOPS. 1328 mm tall, about 37 kg, 2.5 m/s; the 540 Wh battery runs about 2 hours at 1 m/s. The secondary development SDK, a 1080p stereo camera, microphone and speaker are standard.
The manufacturer's own product menu lists eight quadruped editions (L1, L1-W, L1 Maker, L2, L2-W, L2-W Ultra, M1, M1 Pro) and three humanoid editions (NE 01, NE 01 Pro, NE 01 Ultra). The P and W series joint modules are also sold as separate products.
Load class and protection. The L1 carries 8 kg on a 15 kg body and is IP54. The L2 carries 16 kg on a 21 kg body, is IP66 and produces 95 N·m. The M1 carries 30 kg on a 41 kg body, is IP67 and delivers 180 N·m and 6 m/s.
An educational assembly edition of the L1 body. It comes with the same 15 kg body and 48 N·m joint torque, and is built from its parts for teaching purposes.
| Model | Category | |
|---|---|---|
| L1 | Compact Industrial Quadruped Robot | Detail |
| L1-W | Compact Wheeled-Leg Robot | Detail |
| L1 Maker | Educational Assembly Quadruped Robot | Detail |
| L2 | Mid-Class Industrial Quadruped Robot | Detail |
| L2-W | Mid-Class Wheeled-Leg Robot | Detail |
| L2-W Ultra | Surround-View Wheeled-Leg Robot | Detail |
| M1 | Heavy-Class Wheeled-Leg Robot | Detail |
| M1 Pro | Extended-Perception Wheeled-Leg Robot | Detail |
| NE 01 | High-Dynamic Humanoid Robot | Detail |
| NE 01 Pro | SDK-Enabled Humanoid Robot | Detail |
| NE 01 Ultra | Seven-Axis-Arm Humanoid Robot | Detail |
Choosing by brand name alone is not enough. Payload, operating environment, shift pattern, bidirectional traffic, and integration requirements should all shape the decision. We can map the right architecture with you.
