Constant-Force Putty Grinding Robot
The BMR Putty Grinding Robot is a 550 kg autonomous construction robot that sands putty on interior walls and ceilings with intelligent constant force, extracts and collects the dust and discharges the putty residue itself.
It carries automatic navigation, automatic path planning and APP remote control; a parameterised sanding process gives stable, repeatable surface quality. Overall output of 50 m² per hour is more than 1.5 times manual work, with long continuous operation; it works up to 3,200 mm, carries a 100 L dust box and is in the field from Hanoi to Dubai in the fine and industrial decoration of residences, villas, apartments and office buildings.
Enterprise supply · specification support · integration engineering
The Putty Grinding Robot is used for putty sanding on interior walls and ceilings of buildings; it has intelligent constant-force grinding, automatic navigation, automatic path planning, vacuuming and dust collection, automatic putty discharge and APP remote operation. Parameterised sanding process settings ensure stable and reliable sanding quality; it is widely used in fine and industrial decoration scenarios such as ordinary residences, villas, commercial housing, apartments and office buildings. Total weight is 550 kg, dimensions 942 × 752 × 1750 mm, working height up to 3,200 mm and positioning accuracy ±2 cm.
Overall output of 50 m² per hour is more than 1.5 times manual work and it supports long continuous operation. The battery runs more than 4 hours and charges in under 3 hours; there is an AC 220 V / 5 kW supply, a 100 L dust box, 0.5 m/s speed, 20 mm obstacle and 50 mm trench crossing and a 6° climbing angle. The dust collection design lowers dust emission and noise; the robot removes the risk of working at height and solves the low output and low precision of manual sanding. References: at Aurelle in Singapore (Sim Lian, 14 blocks) putty sanding and primer and topcoat latex spraying on two floors over more than 3,000 m² was completed together with the indoor coating robot; at DAMAC Bay in Dubai three robots, together with the indoor coating and floor grinding robots, are in operation at the same time at 50 m² per hour overall; at the 70-storey Cavalli Tower in Dubai Marina it runs seamless alternating cycles with the indoor coating robot in confined spaces; at The Senique in Hanoi (three 37-storey towers) working hours per floor fell by 56 percent and all 72 units passed first acceptance; at the Sheung Shui public housing project in Hong Kong (November 2024) the finish quality of the putty sanding robot met Hong Kong's highest private residential standard and the coating of 10 floors finished in just over a month; at the QXY Staff Apartment in Singapore (16 August 2024) 69-75 m² of putty-coated wall was sanded in 33 minutes (100-110 m² per hour).
Tap the cover to play; sound and loading start only on click.
Intelligent constant-force grinding applies the same pressure to wall and ceiling at every point; parameterised process settings give stable, reliable quality.
Vacuuming and dust collection run into a 100 L box and putty residue is discharged automatically; dust emission and noise fall, and the worker stays away from work at height and putty dust.
Overall output of 50 m² per hour is more than 1.5 times manual work, with long continuous operation; at QXY in Singapore 69-75 m² of putty-coated wall was sanded in 33 minutes.
It is run from the APP with automatic navigation and path planning; at Cavalli Tower and DAMAC Bay in Dubai it works in alternating cycles with the indoor coating robot in confined spaces, and at Aurelle in Singapore more than 3,000 m² on two floors was finished together.
4 images; tap to enlarge.
17 values in 6 categories; data published by the manufacturer.
Verified on the manufacturer page on 18 September 2026.
An itemised quote for the BMR Macun Zımpara Robotu is prepared by configuration, quantity and delivery scope.
Putty sanding is the dustiest, most tiring and least consistent step of interior finishing: the worker sands by hand on a scaffold, pressure and passes vary by person and dust spreads through the room. The Putty Grinding Robot does the job with intelligent constant force: the sanding head applies the same pressure to wall and ceiling at every point, and parameterised process settings keep thickness and smoothness constant from room to room. Vacuuming and dust collection run into a 100 L box and putty residue is discharged automatically; automatic navigation and path planning start and finish the job while the operator monitors from the APP.
The Putty Grinding Robot works between the NP320 Pro, which applies putty and latex, and the NP320, which sprays emulsion: putty is applied, sanded, then primer and topcoat are sprayed. At Sheung Shui the putty application, putty sanding and indoor spraying robots with an automatic material feeding system finished 10 floors in just over a month; 2 operators with 3 robots completed one floor per day. At Cavalli Tower in Dubai a seamless alternating cycle with the indoor coating robot was set up in confined spaces.
The Macun Zımpara Robotu is sourced for Turkey on a project basis; import, customs clearance, commissioning and operator training are part of delivery. Investment is set by corporate quotation against edition, configuration, spare and wear-part provisioning, training scope and quantity. The AC 220 V / 5 kW supply is provided on site. Request a quotation with your project profile.
| Parameter | Value |
|---|---|
| Total weight | 550 kg |
| Moving speed | ≤0.5 m/s |
| Overall dimensions | 942 × 752 × 1750 mm |
| Positioning accuracy | ±2 cm |
| Battery life | ≥4 h |
| Working height | ≤3,200 mm |
| Charging time | ≤3 h |
| Height of surmountable obstacle | ≤20 mm |
| Dust collection box volume | 100 L |
| Width of surmountable trench | ≤50 mm |
| Power supply requirements | AC 220 V / 5 kW |
| Climbing angle | ≤6° |
| Overall efficiency | 50 m²/h |
The Putty Grinding Robot turns the dustiest step of interior finishing into a constant-force, dust-extracted, path-planned machine process: 50 m² per hour, 1.5 times manual, a 100 L dust box, 3.2 m height and 4 hours of battery. Among its references are 3,000 m² at Aurelle in Singapore, alternating work with the coating robot at DAMAC Bay and Cavalli Tower in Dubai, and a finish to the highest private residential standard in Hong Kong. For mass housing and office contractors wanting a three-robot crew with the NP320 and NP320 Pro, request a quotation with your project profile.
Supply model
Supply to Turkey is planned per project; import, delivery and commissioning scope are itemised in the quote.
Pre-sales assessment
Site and mission focused technical feasibility; specification and administrative process support.
Demo and site visit request
Send a demo request; availability and scope are settled in the call.
Source documents
Technical values come from the manufacturer's documents; verified on 18 September 2026. 1 documents at the bottom of the page.
Robotic system costs are optimised according to the selected hardware platform, additional sensor and payload configurations, and the integration scenarios specific to your site. Share your requirements and our engineering team will prepare a feasibility report and a pro forma quotation tailored to your organisation.
Direct contact and advisory line: 0850 532 6 777
The most common questions about the BMR Macun Zımpara Robotu.
On putty surfaces of interior walls and ceilings of buildings, up to 3,200 mm. It is used in the fine and industrial decoration of ordinary residences, villas, commercial housing, apartments and office buildings.
The vacuuming and dust collection system takes the dust into a 100 L box and putty residue is discharged automatically; dust emission and noise fall. An AC 220 V / 5 kW supply is needed on site.
Constant force and a parameterised process give the same pressure and smoothness at every point; output of 50 m² per hour is more than 1.5 times manual work and the robot runs long hours without interruption. The worker stays away from work at height and putty dust.
The M40 and M60 are the sanding-module editions of the same platform as the P45/P65 and reach 4-6 m; the Putty Grinding Robot is a separate compact 550 kg robot for residential and office floors up to 3.2 m and forms a three-robot crew with the NP320 / NP320 Pro coating robots. Projects with floor heights above 3.2 m choose the M40/M60.
At Aurelle in Singapore more than 3,000 m² on two floors was finished with the indoor coating robot; at DAMAC Bay and Cavalli Tower in Dubai it works in alternation with the coating robot; at Sheung Shui in Hong Kong the finish met the highest private residential standard; at QXY in Singapore 69-75 m² of wall was sanded in 33 minutes.
BMR robots are controlled from a single application (the BMR unified APP); the operator connects to several nearby robots from one device, and robot plug-ins are downloaded in the app. Floor and coating robots report worked area, time and status through FMS cloud data management.
The BMR Macun Zımpara Robotu is sourced on a project basis: the site schedule, floor area, concrete or coating system and site access are settled at the survey; import, commissioning and operator training are part of delivery. For a quotation, send the project type, total square metres and the works programme.
