Skip to content
Robotlar
Pricing Guide

RealMan RealBot-L2 Price and Sourcing in Turkey

The RealMan RealBot-L2 is a full-size wheeled humanoid robot whose two humanoid arms work on a 300 mm lift column to cover a 0-2.1 m vertical working range. The 650 × 512 × 1700 mm body weighs approximately 120 kg; 14 of its 17 active degrees of freedom sit in the two 7-axis arms, payload is 5 kg per arm and the lift system carries more than 60 kg including the arms. Each arm houses a six-axis force-torque sensor with a 200 N / 7 N·m range; at the end-effector a two-finger gripper and a five-finger dexterous hand swap quickly. The two-wheel differential chassis runs SLAM navigation and dynamic obstacle avoidance at 0.1-1.0 m/s; the 48 V 20 Ah battery runs around 6 hours and fills in about 1 hour. It is built for home service, retail guidance and data collection.

Share your requirements and our engineering team will prepare a feasibility report and a pro forma quotation tailored to your organisation.

Related models

How much does the RealMan RealBot-L2 cost?

Investment in the RealBot-L2 is set by corporate quotation against compute board choice (Jetson AGX Orin 64 GB or RDK S100), camera and end-effector configuration, quantity and delivery terms. For project-specific configuration and corporate pricing, request a quotation; we map the sourcing route and the commissioning and training schedule with you.

How is it sourced in Turkey?

We deliver RealMan robots to manufacturing, retail and research projects through enterprise supply, commissioning and engineering support. For the full technical breakdown see our RealBot-L2 product page.

Key technical figures

17 active degrees of freedom; 5 kg per arm; 300 mm lift travel, 0-2.1 m vertical working range; lift capacity above 60 kg; 0.1-1.0 m/s; 48 V 20 Ah, around 6 hours.

Let's Find Your Solution

Robotic system costs are optimised according to the selected hardware platform, additional sensor and payload configurations, and the integration scenarios specific to your site. Share your requirements and our engineering team will prepare a feasibility report and a pro forma quotation tailored to your organisation.