Concept scenario
Data Center Cable and Cabinet Thermal Inspection
Scenario record: it defines the environment, the mission flow and a proposed hardware and software configuration. The list below is a configuration proposal, not an installation inventory. Field projects lists deployed systems and their measurements.
- Environment
- Indoor, facility
- Operating mode
- Supervised autonomy
- Proposed robot
- Unitree AS2
The problem addressed
Hardware burns and data loss risks caused by local cooling errors.
Draft mission flow
- 1Performs autonomous rings in hot and cold aisles of server rooms.
- 2Finds heating switches or cables by thermally scanning the surface temperature of each server rack.
- 3Locally detects inadequacies in the cooling system (HVAC) and transmits them to the system administrator.
Proposed hardware
- High Precision Thermal Camera
- Anti-Collision Radar
- 1000Wh Battery
Proposed software
- Navigation
- Centimetric precision SLAM in narrow server corridors
- Model
- In-Server Cabinet Heat Map and Anomaly Deduction
- Integration
- Data Center Infrastructure Management (DCIM)
The robot's real operating limits
Unitree AS2
Industrial Capacity in a Compact Chassis
Product page- Ingress rating
- IP54
- Runtime
- >4 hours (No load)
- Operating temperature
- -20°C to 50°C
- Payload
- Up to 65 kg
- Max speed
- >5 m/s
- Climb
- 40°
Values are manufacturer data. Scenario fit is determined by comparing these limits with site conditions.
From scenario to installation
Feasibility is determined by the site survey: floor and route, network coverage, the charging point, intervention responsibilities and the conditions under which the robot must stop. The survey report defines the scope, the constraints and the commissioning steps.