Cold Storage Insulation Test
Scenario record: it defines the environment, the mission flow and a proposed hardware and software configuration. The list below is a configuration proposal, not an installation inventory. Field projects lists deployed systems and their measurements.
- Environment
- Indoor, facility
- Operating mode
- Supervised autonomy
- Proposed robot
- Unitree AS2
The problem addressed
Hidden insulation damage and product degradation risks that increase cooling costs.
Draft mission flow
- 1Navigates between racks with special insulated sensors in a -20°C environment.
- 2Detects thermal leaks (heat ingress) in wall panels and door seals.
- 3Reports insulation tears experiencing energy loss with 3D coordinates.
Proposed hardware
- Thermal Imaging Sensor
- Low Temperature Battery Kit (-20°C adaptation)
- Edge AI Module
Proposed software
- Navigation
- Slippery floor autonomy in industrial cold rooms
- Model
- Heat Leak Boundary Detection (Thermal Boundary Detection)
- Integration
- BMS (Building Management Systems)
The robot's real operating limits
Unitree AS2
Industrial Capacity in a Compact Chassis
Product page- Ingress rating
- IP54
- Runtime
- >4 hours (No load)
- Operating temperature
- -20°C to 50°C
- Payload
- Up to 65 kg
- Max speed
- >5 m/s
- Climb
- 40°
Values are manufacturer data. Scenario fit is determined by comparing these limits with site conditions.
From scenario to installation
Feasibility is determined by the site survey: floor and route, network coverage, the charging point, intervention responsibilities and the conditions under which the robot must stop. The survey report defines the scope, the constraints and the commissioning steps.