Night Shift Security Patrol & Burglary Prevention
Scenario record: it defines the environment, the mission flow and a proposed hardware and software configuration. The list below is a configuration proposal, not an installation inventory. Field projects lists deployed systems and their measurements.
- Environment
- Indoor, public area
- Operating mode
- Supervised autonomy
- Proposed robot
- Unitree AS2
The problem addressed
Insufficient night security staff coverage, falling asleep risk, and theft in blind spots.
Draft mission flow
- 1Robot patrols all floors with IR and thermal cameras throughout the night after mall closes.
- 2Live video stream initiated to security center when human thermal signature or motion anomaly detected.
- 3Siren activated and police notified when glass break or forced entry sound detected.
- 4All store shutters verified as closed throughout the night; open shutters reported immediately.
Proposed hardware
- Night Vision Camera (IR)
- Thermal Camera
- 3D LiDAR
- Glass Break Sensor
- Speaker/Siren
Proposed software
- Navigation
- IR-assisted full floor patrol navigation in dark environment during mall closed hours
- Model
- Human Presence Detection (Thermal Silhouette), Glass Break Acoustic Analysis, and Motion Anomaly Classification
- Integration
- Mall 24/7 Security Center and Police Emergency Call System
The robot's real operating limits
Unitree AS2
Industrial Capacity in a Compact Chassis
Product page- Ingress rating
- IP54
- Runtime
- >4 hours (No load)
- Operating temperature
- -20°C to 50°C
- Payload
- Up to 65 kg
- Max speed
- >5 m/s
- Climb
- 40°
Values are manufacturer data. Scenario fit is determined by comparing these limits with site conditions.
From scenario to installation
Feasibility is determined by the site survey: floor and route, network coverage, the charging point, intervention responsibilities and the conditions under which the robot must stop. The survey report defines the scope, the constraints and the commissioning steps.