Commercial Robotic Mower
PUDU GT5 is a commercial autonomous mower built for large turf areas. Its 60-inch (1.52 m) rotary cutting deck targets 8,000 m² per hour, vacuuming and collecting grass clippings, fallen leaves and light turf debris in the same pass.
A 26 kWh battery runs up to 10 hours and covers 65,000 m² per charge; when the hopper fills it transits to empty itself and returns precisely to the breakpoint.
Turkey distributor · on-site commissioning and support protocol (SLA) · 1-year warranty
PUDU GT5 is Pudu Robotics' commercial autonomous mower for large turf areas. With a 1910 × 1586 × 1293 mm body and a weight of 850 kg including batteries, it sits between the GT3 and the GT7.
On cutting it applies the GT3's logic at a larger scale: a 60-inch (1.52 m) rotary cutting deck targets 8,000 m² (2 acres) per hour while vacuuming grass clippings, fallen leaves and light turf debris into its hopper in the same pass. No second collection run or follow-up cleanup crew is needed. Height of cut adjusts from 38 to 152 mm (1.5-6 in) and maximum mowing speed is 10 km/h.
Site recognition works two ways: the GT5 explores the field on its own to generate precision operational maps, and target areas can also be geofenced using online or satellite imagery. This removes manual perimeter mapping and lets cutting start on new sites immediately. Along pre-mapped internal routes it transits between different fields on its own and resumes mowing on arrival. High-precision positioning lets it mow to within 10 cm of edges, so no uncut border strip is left. When the hopper fills it transits to empty it and returns precisely to the breakpoint.
For safety, surround-view RGB, RGBD and LiDAR fuse into 360° awareness; pedestrians, vehicles and site assets such as hoses or light poles are recognized, with slow-down, bypass or stop applied by risk level. Active anti-fall protection detects dangerous drop-offs such as water shorelines, steps and steep embankments, rerouting or braking together with digital no-go zones. The chassis is all-metal and an IP66 weather-resistance rating protects internal components against rain and moisture. Maximum slope while mowing is 20°.
On energy, a 26 kWh battery delivers 8-10 hours of runtime and 65,000 m² (6.5 ha / 16 acres) of coverage per full charge. Standard charging takes 10 hours at 3.3 kW; optional 6 kW fast charging brings that down to 5 hours. In Turkey it is offered through Pudu Robotics Turkey Distributor robotlar.org with Turkish technical support, installation consulting and after-sales service.
2 use cases2 videos: manufacturer footage and field recordings. Tap a cover to play.
The use cases the manufacturer defines for the PUDU GT5.
The GT5 cuts, vacuums, and collects grass clippings, fallen leaves, and light turf debris simultaneously during large-scale rotary mowing.
The GT5 autonomously transits to empty its hopper when full, then returns precisely to the breakpoint to continue its task.
The GT5 powers through up to 10 hours of continuous operation, covering up to 16 acres on a single charge.
Equipped with a rugged 60-inch rotary cutting deck, the GT5 clocks a target efficiency of 2 acres per hour.
The GT5 moves seamlessly between different pitches or turf zones along pre-mapped internal routes.
The GT5 autonomously explores the field to generate precision operational maps.
High-precision positioning keeps the GT5 on a stable path to mow within 10 cm of edges.
By fusing surround-view RGB, RGBD, and LiDAR, the GT5 maintains continuous spatial awareness of its surrounding environment.
The GT5 instantly recognizes pedestrians, vehicles, and assets like hoses or light poles.
Instantly detects dangerous drop-offs including water shorelines, steps, and steep embankments.
Built with an all-metal chassis, the GT5 withstands heavy daily commercial wear.
13 images; tap to enlarge.
13 values in 7 categories; data published by the manufacturer.
Verified on the manufacturer page on 18 September 2026.
An itemised quote for the PUDU GT5 is prepared by configuration, quantity and delivery scope.
Supply model
Delivered from Turkey stock; installation, training and on-site service under one responsibility.
Pre-sales assessment
Site and mission focused technical feasibility; specification and administrative process support.
Demo and site visit request
Send a demo request; availability and scope are settled in the call.
Source documents
Technical values come from the manufacturer's documents; verified on 18 September 2026. 0 documents at the bottom of the page.
Robotic system costs are optimised according to the selected hardware platform, additional sensor and payload configurations, and the integration scenarios specific to your site. Share your requirements and our engineering team will prepare a feasibility report and a pro forma quotation tailored to your organisation.
Direct contact and advisory line: 0850 532 6 777
The most common questions about the PUDU GT5.
All three are autonomous mowers, but they differ in scale and cutting method. The GT3 mows with rotary blades and collects in the same pass: 914.4 mm width of cut, 450 kg, 13 kWh, 20,000 m² per charge. The GT5 applies the same rotary-plus-collection logic at a larger scale: a 1.52 m (60 in) deck, 850 kg, 26 kWh, 65,000 m² per charge. The GT7 uses a triplex reel unit; it can collect too, but its real difference is the uniform cut and striping professional sports fields require: 1600 mm width of cut, 900 kg, 26 kWh, 70,000 m² per charge. In short: GT5 for fast wide-area mowing with collection, GT7 for stadium-grade cut and pattern, GT3 for smaller sites.
The 26 kWh battery delivers 8-10 hours of runtime and 65,000 m² (6.5 ha / 16 acres) of coverage per full charge. The mowing rate is 8,000 m² (2 acres) per hour. Standard charging takes 10 hours at 3.3 kW; the optional 6 kW fast charger brings that down to 5 hours.
Yes, in the same pass. During large-scale rotary mowing the GT5 simultaneously vacuums grass clippings, fallen leaves and light turf debris into its hopper, leaving a spotless field behind. When the hopper fills it transits to empty it on its own, then returns precisely to the breakpoint and continues. No operator intervention is required.
Two ways. The GT5 explores the field on its own to generate precision operational maps, and target areas can also be geofenced using online or satellite imagery. Together these remove manual perimeter mapping so cutting starts on new sites instantly. Along pre-mapped internal routes it transits between fields on its own and resumes mowing on arrival.
High-precision positioning keeps the GT5 on a stable path and lets it mow to within 10 cm of edges. This minimizes uncut border strips and gives a uniform finish across the field.
Surround-view RGB, RGBD and LiDAR fuse into 360° awareness; pedestrians, vehicles and site assets such as hoses or light poles are recognized instantly, with slow-down, bypass or stop applied by risk level. Active anti-fall protection also detects dangerous drop-offs such as water shorelines, steps and steep embankments, rerouting or braking together with digital no-go zones, so runoff and rollover risks are eliminated.
The chassis is all-metal and built to withstand heavy daily commercial wear. A separate IP66 weather-resistance rating protects internal components against rain and moisture. Maximum slope while mowing is 20°.
The PUDU GT5 is available in Turkey through Pudu Robotics Turkey Distributor Robotlar.org. Pricing is quote-based; sales, installation and technical support are provided nationwide. Rental may additionally be considered for high-volume, long-term corporate projects.
Robotlar.org is the Turkey Distributor for Pudu Robotics and its authorized systems integrator (Service Hub), providing sales, on-site engineering across Turkey, spare parts and integration support.
GT5 price guide, authorised service and all Pudu models
