On 28 July 2026 the US Federal Communications Commission placed foreign-produced mobile robots on its Covered List for new equipment authorizations, citing cybersecurity.
The Hacker News, 30.07.2026Services
Secure Robot
Commissioning.
Robotlar.org is a Unitree partner and distributor in Türkiye. We deliver your robot to your corporate network with every destination, its frequency and its data volume measured and documented.
- 72 hours
- connection measurement for every robot
- 6 documents
- an audit-ready handover file
- Closed by default
- outbound connections you have not approved stay closed at the gateway and are logged
A robot is a network device.
Mobile robots carry cameras, microphones, LiDAR and radios. Corporate IT teams want to manage them with the same discipline as servers and camera systems.
Recorded Future's report of 5 May 2026 advises organizations operating robots to segment networks, monitor outbound traffic and keep a vulnerability register.
Recorded Future, 05.05.2026We make these recommendations a standard part of delivery.
Three tiers, one method.
Delivery Configuration
Your new robot is measured and configured in our workshop before it reaches your site.
- 72-hour passive traffic capture and destination table
- Wireless setup interfaces and default accounts configured
- 4G module disabled; measured and logged separately if needed
- A gateway between the robot and your network, outbound closed by default
- Functional test with outbound closed: mapping, navigation, charging, SDK
Installed Fleet Review
On-site measurement and improvement for Unitree robots already in operation.
- Inventory of open services, versions and components
- Version inventory checked against manufacturer release notes
- Configuration and re-measurement
- Joint acceptance with your IT team
For critical infrastructure operators, scope for robots bought through other channels is defined at the quotation stage.
Release Maintenance
Tracking and approval of manufacturer releases, approved offline updates, two configuration checks per year. Available on request.
- Each new release is tested on the same model in our workshop
- Release bulletin with an approval note
- Installation in a logged, time-limited maintenance window
This tier is offered to organizations that are not critical infrastructure operators. In critical infrastructure, monitoring is run with your authorized provider; we supply the release bulletin and the handover file.
Process
- 1
Discovery
We review the robot model, your network and your IT policies.
- 2
Measurement
The robot is observed for 72 hours and every destination is recorded.
- 3
Configuration
Interfaces, accounts and network rules are set.
- 4
Re-measurement
Traffic and functions are verified again with outbound closed.
- 5
Handover
Documents go to your IT team and the emergency procedure is rehearsed on site.
- 6
Maintenance
Each new software release is tested in our workshop and sent to you with an approval note.
Handover file
Six documents your IT and audit teams can use directly.
- Connection Measurement Report
- Configuration Checklist
- Network Flow Diagram
- Robot Data Flow Inventory (input to your data protection work)
- Audit File
- Change and Release Log
Who it is for
Energy
An audit-ready file for substation and field inspection robots.
Airports
Network separation and logging for robots in terminals and technical areas.
Data centers
Keeping the patrol robot isolated from your management network.
Logistics and manufacturing
An IT approval path for robots joining the warehouse network.
Public sector
Data inventory and offline operation for in-house use.
Frequently asked questions
Does the configuration affect the warranty?
Our steps are configuration-level and do not touch the hardware. For robots bought from Robotlar.org we handle warranty and service ourselves. We confirm in writing, at the quotation stage, how the configuration affects the warranty for your model.
What stops working when outbound is closed?
On every robot we test mapping, navigation, charging and SDK missions with outbound closed, and any affected function is stated in the report. Cloud-dependent features such as remote access over the cloud stay off. If you need a cloud feature, only its destination is opened, with your approval.
How are software updates handled?
We test each new release on the same model in our workshop first. Approved releases are installed on site in a logged, time-limited maintenance window.
What do you provide for data protection?
A Robot Data Flow Inventory showing what data the robot produces, where it is stored and whether any leaves the country. The legal assessment remains with your data controller.
We are subject to Türkiye's Cybersecurity Law No. 7545. Is this service enough?
This service is the installation and commissioning of the robot and does not replace your statutory obligations. In critical infrastructure the firewall and monitoring run on your own system or through your authorized provider. We supply the robot-side configuration, the measurement and the file you present to your auditors.
We did not buy our robot from you. Can we still use the service?
Yes. For robots bought through another channel, your warranty relationship stays with your seller. Before we start, we agree the scope together and take your seller's view into account.
How long does it take?
Delivery Configuration takes about 5 business days including the 72-hour measurement. The Installed Fleet Review is scheduled according to the size of your site.
Will the robot be completely secure?
No network device can be promised absolute security. The gateway controls the robot's network traffic; for short-range radio interfaces such as Bluetooth we document physical access measures separately. What we deliver is a measured, documented and auditable installation: you and we both know what is open and what is closed.
See what your robot talks to before it joins your network.
Robotlar.org is an engineering and project firm headquartered in Ankara.