Skip to content
Robotlar
Concept scenario

WiFi Dead Zone Detection & Signal Quality Mapping

Scenario record: it defines the environment, the mission flow and a proposed hardware and software configuration. The list below is a configuration proposal, not an installation inventory. Field projects lists deployed systems and their measurements.

Environment
Indoor, public area
Operating mode
Supervised autonomy
Proposed robot
Unitree AS2

The problem addressed

Constantly dropping WiFi, slow internet, and non-functional mobile app in malls; digital age customer complaint.

Draft mission flow

  1. 1Robot measures WiFi signal strength, bandwidth, and latency at every point in the mall.
  2. 2Dead zones (no/weak signal) and high interference areas visualized on 3D heatmap.
  3. 3Indoor positioning service accuracy tested at each point via Bluetooth beacon receiver.
  4. 4Access point addition/relocation recommendations automatically reported to IT team; verification tour conducted after fixes.

Proposed hardware

  • WiFi 6 Analyzer Module
  • Bluetooth Beacon Receiver
  • GPS/iBeacon Location Module
  • HD Camera
  • LED Display

Proposed software

Navigation
Grid-based signal measurement route covering all mall areas
Model
WiFi Signal Strength Heatmap, Bandwidth Test, and Interference Source Detection
Integration
Mall IT Infrastructure Management System and Network Operations Center (NOC)

The robot's real operating limits

Unitree AS2

Unitree AS2

Compact industrial robot dog

Product page
Ingress rating
IP54
Runtime
>4 hours (No load)
Operating temperature
-20°C to 50°C
Payload
Up to 65 kg
Max speed
>5 m/s
Climb
40°

Values are manufacturer data. Scenario fit is determined by comparing these limits with site conditions.

From scenario to installation

Feasibility is determined by the site survey: floor and route, network coverage, the charging point, intervention responsibilities and the conditions under which the robot must stop. The survey report defines the scope, the constraints and the commissioning steps.